1. Change Record
  2. Table of Contents
  3. Document Title
  4. Purpose Statement
  5. Summary
  6. Definitions of Terms
  7. Reference Documents
  8. Other Preamble as Needed
  9. Document Title
  10. 1 Section Heading in Verdana font 12 pt bold (use Heading 1 Style)
    1. 1.1 Subsection Heading (use Heading 2 Style)
    2. 1.2 Sub-subsection Heading (use Heading 3 Style)
      1. 1.2.1 Etc. (use Heading 4 Style)
  11. 2 Section 2 Heading
  12. 3 Etc.

Document Title | Handle (relx.x) | Latest Revision Date YYYY-MM-DD


 

 

Vera C. Rubin Observatory

Document Title

 

Author(s) Name(s)

Handle (relx.x)

Latest Revision Date: Month XX, 20XX

 

This document is under change control. Its contents may not be changed, altered or their provisions waived without approval via the Rubin Observatory change control process. If this document is changed, it will retain the Handle designation shown above. Control is exercised via the designated approved version of this Handle in Rubin Observatory’s digital archive and not printed versions.

 

 

 

 

 

             

Change Record

Release
Date
Description
Owner name
       
       
       
       
       
       
       
       
       
       
       
       
       
       

 

Back to top


Table of Contents

Change Record  i

Purpose Statement  iii

Summary  iii

Definitions of Terms  iii

Reference Documents  iii

Other Preamble as Needed  iii

1   Section Heading in Verdana font 12 pt bold (use Heading 1 Style)  1

1.1   Subsection Heading (use Heading 2 Style)  1

1.2   Sub-subsection Heading (use Heading 3 Style)  1

1.2.1   Etc. (use Heading 4 Style)  1

2   Section 2 Heading  1

3   Etc.  1

 

 

Back to top


Document Title

Back to top


Purpose Statement

This interface control document (ICD) is to be used for developing final designs of hardware, software, and interface protocols on both sides of the interface. Further updates to this document are expected prior to the finalizing component designs, with any/all changes subject to the LSST change control and approval processes.

Back to top


Summary

The text style is Verdana font 9pt with 1.5 line spacing and 6pt paragraph spacing before and after. Justify text to align the paragraphs with both left and right margins. Use no first line indent. Page margins are 1.5 inches at the top and 1 inch on the sides and at the bottom.

Back to top


Definitions of Terms

Word being defined in bold – Definition text; no period necessary at the end of the text block unless the definition is more than one sentence long.

Back to top


Reference Documents

“Title of Document” (Document-XXXXX)

“Title of Document 2” (LPM-XXX)

Back to top


Other Preamble as Needed

The text style is Verdana font 9pt with 1.5 line spacing and 6pt paragraph spacing before and after. Justify text to align the paragraphs with both left and right margins. Use no first line indent. Page margins are 1.5 inches at the top and 1 inch on the sides and at the bottom.

 

Back to top


Document Title

Back to top


1  Section Heading in Verdana font 12 pt bold (use Heading 1 Style)

The text style is Verdana font 9pt with 1.5 line spacing and 12pt paragraph spacing before and after. Justify text to align the paragraphs with both left and right margins. Use no first line indent. Page margins are 1.5 inches at the top and 1 inch on the sides and at the bottom.

Bulleted lists use no paragraph spacing before and after.

·   Example with no paragraph spacing

·   Example

·   Example

If the list looks crowded, 3 pt spacing before and after can be used.

·   Example with 3 pt spacing

·   Example

·   Example


1.1  Subsection Heading (use Heading 2 Style)


1.2  Sub-subsection Heading (use Heading 3 Style)


1.2.1  Etc. (use Heading 4 Style)

Back to top


2  Section 2 Heading

The text style is Verdana font 9pt with 1.5 line spacing and 12pt paragraph spacing before and after. Justify text to align the paragraphs with both left and right margins. Use no first line indent. Page margins are 1.5 inches at the top and 1 inch on the sides and at the bottom.

Table Example follows:

Table 1: Tables are inserted in line with text and “Autofit to Window”. Table labels are created by right click/Insert Caption/Table. Table labels appear above the table, using the Caption pre-set style

Column Heading Column Heading Column Heading Column Heading
Data Data Data Data
Data Data Data Data
Data Data Data Data

 

Back to top


3  Etc.

The text style is Verdana font 9pt with 1.5 line spacing and 12pt paragraph spacing before and after. Justify text to align the paragraphs with both left and right margins. Use no first line indent. Page margins are 1.5 inches at the top and 1 inch on the sides and at the bottom.

Figure Example follows:

Figure 1: Figures/charts/graphs in image formats are inserted “In Line with Text” from the Picture Tools/Format/Wrap Text menu and centered. Figure captions are created by right click/Insert Caption/Figure. Captions appear below the figure, using the Caption pre-set style.

Back to top